Home/Electrical/Lighting and GPO upgrades

Commercial hallway lighting upgrade
Emergency exit lighting in a commercial corridor
Commercial GPO and power point installation

Lighting and GPO upgrades

Licensed electricians upgrade old fluorescent battens to LED, add extra power points, and test emergency lighting on occupied sites across Melbourne and Victoria.

  • LED fittings picked for how the room is used
  • Extra GPOs on a circuit that can take the load
  • Emergency lighting tested with the upgrade
  • Licensed & insured
  • 8 trades, one account
  • Victoria-wide

Our Process

Fluorescent tubes ready to swap for LED1

Review the existing install

We look at the fluorescent tubes and fittings already on site - what can stay, what should go to LED, then quote from that.

Commercial hallway lighting install2

Install by zone

Lights and outlets go in one zone at a time so live floors keep trading.

Testing lighting and switches after install3

Test and hand over

Circuits tested, fittings labelled, old lamps taken for proper disposal.

What we install

Commercial LED batten lighting on a tiled ceiling

Commercial LED lighting

Battens, downlights and high bays swapped to LED for the room, not a generic fitting site-wide.

Commercial GPO installation

Extra GPOs and circuits

New outlets for cleaners, kitchens and IT, on a circuit rated for the load.

Green emergency exit light in a commercial corridor

Emergency and exit lighting

First test and a defect list with the upgrade. Ongoing tests can sit on a maintenance visit.

Elevated access for commercial lighting works

Quoted from a site count

Fittings counted and GPO positions marked with your site contact before install day.

Commercial hallway lighting upgrade

Commercial lighting upgrades in Melbourne

Old fluorescent battens, mixed whites across two floors, or a warehouse still on high-bay metal halide.

We count fittings and pick LED for how the room is used. Some rooms only need LED tubes in sound battens. Others need new fittings, sensors, or a colour-temperature match so two floors do not look unfinished.

Exit and emergency fittings are tested with the upgrade. Occupied sites across Melbourne and regional Victoria, booked around trading hours, holidays or a weekend shutdown.

Mon-Fri 7am-5pm

Damaged power point ready for a GPO upgrade

Replace old and broken GPOs

Cracked plates, burnt sockets, loose switches and double adaptors taped to a wall are a GPO upgrade, not a longer lead. We replace what is already there, then add extra points where staff actually plug in.

A kettle or cleaner circuit on the lighting run will trip. We check the load and put new outlets on a circuit that can take it, marked with your site contact so we are not putting a point behind a fixed cabinet.

If the board cannot take the extra load, we say so before anyone orders fittings.

Mon-Fri 7am-5pm

Get a fixed price for your electrical job

  • Staged around your trading hours
  • One invoice for every trade

Why Melbourne facilities pick Reliant for lighting and GPOs

Licensed commercial electricians, quoted from what is actually on the ceiling.

  • Licensed commercial electricians on every job
  • Emergency and exit lighting tested as part of the install
  • Insured for occupied commercial sites
Aged care corridor lighting works

What to have ready before we visit

  • Rough count of fittings and extra GPOs you want
  • Where extension leads have become permanent
  • Whether any zones already have sensors or dimming
  • Access hours and whether this is an after-hours job

What you get

  • A clear fitting and GPO schedule before install day
  • Emergency lighting tested, defects listed
  • Old lamps taken for proper disposal

When it is a different job

  • A single tripping circuit - electrical fault finding
  • The board cannot take the new load - a switchboard upgrade first
  • A full office recable with no new fittings - data cabling

Request a lighting and GPO quote

Site, photos, and where you need extra power. Phone 1300 304 380 (Mon-Fri 7am-5pm) or use the form on this page.

Mon–Fri 7am–5pm

Questions we get asked

It depends on fitting count, access height, and whether the circuits can stay. We quote after a site count, not a blanket per-fitting rate.

Yes. If the batten body is sound we can often fit LED tubes or a new LED batten on the same run. If the fitting or wiring is tired, that goes in the quote before we open the ceiling.

Yes. Extra GPOs for break rooms, cleaner corridors, reception and IT - on a circuit rated for the load, not daisy-chained off the lighting run.

We can include a first test and a defect list. Ongoing tests can sit on a maintenance visit.

Yes. Metro Melbourne, the Peninsula, Geelong, Ballarat, Bendigo and regional Victoria.

Yes. Retail and hospitality often want nights. Schools and aged care often want a full closure in holidays or on a weekend. Tell us which constraint applies.

Site address, a rough fitting count, photos of the ceiling and any extension leads, and access hours.

Contact

Tell us about your site, the trade you need and the timing. We will come back with a clear next step - usually within one business day.

Send an enquiry

Fields marked required. We never share your details.

Photos of the issue (optional)